成都升降机适用于一些车站啊、码头啊、商场啊、工厂等各个场所，有客户反映购置的成都升降机存在偏摆现象，这是什么原因呢? Chengdu lift is applicable to some stations, ah, docks ah, shopping malls, factories and other places, there are customers to reflect the purchase of the Chengdu lift the existence of partial swing phenomenon, which is why?

1.成都升降机偏摆分为前后来回摆动和左右来回摆动，由于液压升降机的结构原理，前后偏摆现象很少见，在这里主要说的是左右偏摆。Chengdu elevator partial pendulum is divided into before and after swinging back and forth, as a result of the structural principle of hydraulic lift, partial swing phenomenon is very rare, here is mainly said that the left and right yaw.

2.成都液压升降机的摆动幅度，随着升降高度的变化而变化的，升的高度越高升降机械的摆动就会越大。Chengdu hydraulic lift of the swing amplitude, with the change of the height of the lift and change, the higher the height of the lift will be the greater the swing of the mechanical.

3.成都升降机偏摆幅度最小，移动时平台偏摆幅度略大，其偏摆幅度最大限度为3-5公分。Chengdu elevator yaw rate is minimal, when the platform moves slightly larger amplitude, the maximum limit of 3-5 cm.

4.感觉到的小幅度摆动，这都是正常反操作人员不用惊慌，在这时需要稳固好成都升降机的四周，升降机严禁超载。Feel a small swing, this is the normal anti operator do not panic, at this time need to firmly around the Chengdu lift, lift is strictly prohibited overloading.

5.偏摆幅度过大时应立即停止成都升降机的作业并断开电源，请专业人士进行维修，严禁私自维修。Partial swing is too large, should immediately stop the operation of the elevator in Chengdu and disconnect the power supply, please professionals to repair, maintenance is strictly prohibited without permission.

成都升降机的摆动幅度应该保持在规定范围之内，但不可漫不经心，发现问题及时处理，清除安全隐患，让液压升降机保质保量的完成升降作业。 Chengdu lift the swing should be kept within the scope of the provisions, but can not be casual, found that the problem in a timely manner, clear security risks, so that the quality and quantity of hydraulic lift to complete the lifting operation.